Input Power Requirements
| Line Voltage |
120 Vac, 60
Hz
(Special voltages available on request) |
| Current |
1.0 A
|
| Line Leakage |
< 50 µA
|
Ultrasonic Generator
(Complies with FDA Regulation
21 CFR 1050.10 and FCC Regulations)
| Frequency |
1.0 MHz ±
5%
|
| Waveform |
amplitude modulated
at 120 Hz ± 1%
|
| Pulse Duration |
8 ms ±
1%
|
| Output Mode |
adjustable
interrupted & non-interrupted
|
| Output Power |
0 to 20 W total
± 20%
0 to 5 W/cm²
± 20%
|
| Temporal Peak/Temporal Average Intensity |
2.8:1 ±
20%
|
| Treatment Timer |
adjustable
0 to 30 minutes
|
| Crystal Material |
barium-titanate
|
| Applicator Beam Type |
collimating
|
| Frequency |
1.0 MHz ±
5%
|
| ERA (Effective Radiating Area) |
4 cm²
± 20%
|
| BNR (Beam Nonuniformity Ratio) |
5.5:1 maximum
|
| Small Faceplate Size |
1.5" diameter
|
| Standard Faceplate Size |
2.25" diameter
|
Caution: Federal law (USA) restricts this device to sale by or on the order of a licensed practitioner
- Lightweight standard transducer
- Optional QuickConnect™ transducer
- Optional small transducer with QuickConnect cable
- Cable fault alarm system
- Transducer protection switch
- Adjustable interrupted output mode
- 0 to 20 watt output • 30 minute timer
- Dual channel, 4 pad stimulator
- Dual intensity controls
- Polarity control
- Bipolar application (no dispersive pad)
- Selectable frequency, pulse width, on/off surge duration
- Surge and reciprocal mode ramped
- Intensity reset circuit
- Patient treatment stop switch
- Combination therapy capability
- Two Year Warranty - Generator - Parts and Labor
- One Year Warranty - Transducer - Parts and Labor
| Waveform |
dc "needle"
pulses with no parasitic spike
|
| Output Voltage |
0 to 500 peak
V
|
| Output Intensity |
20 µC
maximum charge
per pulse into
100 Ohm load
|
| Pulse Width |
narrow 10 µs,
medium 20 µs, wide 30 µs
|
| Frequency Range |
1 to 160 pulses
per s
|
| Surge On Duration, Reciprocal On/Off Duration |
1, 2.5, 5,
7.5, 10, 15, 20, 30 s
| Surge Off Duration |
2.5, 5, 10,
15,
20, 30, 50, 90 s |
| Overall Dimensions |
19½"
W x 11" D x 7" H
|
| Weight (including transducer) |
20 lbs.
|
| Shipping Weight |
27 lbs.
|
| Standard Soundhead |
32-US/752
|
| Standard QuickConnect Soundhead |
32-US/752-D
|
| Small QuickConnect Soundhead |
32-US/752-SM
|
| Standard/Small QuickConnect Soundhead |
32-US/752-D2
|
| Wall Mount Bracket |
9-WB
|
| High Impact Plastic Utility Cart |
4-APS-2000
|
| Paddle Electrode |
2-PES
|
| Treatment Handle |
2-118
|
| Flextrode® 8" x 10" Dispersive Electrode |
2-F106
|
