Input Power Requirements
| Line Voltage |
120 Vac, 60
Hz
(Special voltages available on request) |
| Current |
1.0 A
|
| Line Leakage |
< 50 µA
|
Ultrasonic Generator
(Complies with FDA Regulation
21 CFR 1050.10 and FCC Regulations)
| Frequency |
1.0 MHz ±
5%
|
| Waveform |
amplitude modulated
at 120 Hz ± 1%
|
| Pulse Duration |
8 ms ±
1%
|
| Output Mode |
adjustable
interrupted & non-interrupted
|
| Output Power |
0 to 20 W total
± 20%
0 to 5 W/cm²
± 20%
|
| Temporal Peak/Temporal Average Intensity |
2.8:1 ±
20%
| Treatment Timer |
adjustable
0 to 30 minutes
|
Applicator (Transducer)
| Crystal Material |
barium-titanate
|
| Applicator Beam Type |
collimating
|
| Frequency |
1.0 MHz ±
5%
|
| ERA (Effective Radiating Area) |
4 cm²
± 20%
|
| BNR (Beam Nonuniformity Ratio) |
5.5:1 maximum
|
| Small Faceplate Size |
1.5" diameter
|
| Standard Faceplate Size |
2.25" diameter
|
Caution: Federal law (USA) restricts this device to sale by or on the order of a licensed practitioner
- Lightweight standard transducer
- Optional QuickConnect™ transducer
- Optional small transducer with QuickConnect cable
- Cable fault alarm system
- Transducer protection switch
- Adjustable interrupted output mode
- 0 to 20 watt output • 30 minute timer
- Dual channel, 4 pad stimulator - US/54
- Single channel, 2 pad stimulator - US/50
- Dual intensity controls - US/54
- Tetanize mode
- Adjustable pulsation and ramped surge modes
- Reciprocal mode ramped - US/54
- Intensity reset circuit
- Patient treatment stop switch
- Combination therapy capability
- Two Year Warranty - Generator - Parts and Labor
- One Year Warranty - Transducer - Parts and Labor
- CSA Approved
Waveform asymmetrical alternating current (no load)
| Output Voltage. |
110 V peak
into 1k Ohm load
28 V peak into
100 Ohm load
|
| Output Intensity |
56 µC
maximum charge
per pulse into 100 Ohm load |
| Pulse Width |
200 µs
at 50% V maximum
|
| Frequency Range |
1 to 80 pulses
per s
|
| Surge & Reciprocal Duration |
adjustable
3.75 s on/off
to 0.375 s on/off
|
Instrument US/50 and US/54
| Overall Dimensions |
14½"
W x 11" D x 7" H
|
| Weight (including transducer) |
14 lbs.
|
| Shipping Weight |
22 lbs.
|
| Standard Soundhead |
32-US/50
|
| Standard QuickConnect Soundhead |
32-US/50-D
|
| Small QuickConnect Soundhead |
32-US/50-SM
|
| Standard/Small QuickConnect Soundhead |
32-US/50-D2
|
| Standard Soundhead |
32-US/54
|
| Standard QuickConnect Soundhead |
32-US/54-D
|
| Small QuickConnect Soundhead |
32-US/54-SM
|
| Standard/Small QuickConnect Soundhead |
32-US/54-D2
|
