SynchroSonic ® U/HVG50 Specifications
Previous Page


SynchroSonic U/HVG50  Combination Ultrasound with optional three shelf utility cart

Input Power Requirements
Line Voltage
120 Vac, 60 Hz
(Special voltages available on request)
Current
1.0 A
Line Leakage
< 50 µA

Ultrasonic Generator
(Complies with FDA Regulation 21 CFR 1050.10 and FCC Regulations)
Frequency
1.0 MHz ± 5%
Waveform
amplitude modulated at 120 Hz ± 1%

Pulse Duration
8 ms ± 1%
Output Mode
adjustable interrupted & non-interrupted
Output Power
0 to 20 W total ± 20%
0 to 5 W/cm² ± 20%
Temporal Peak/Temporal Average Intensity
2.8:1 ± 20%
Treatment Timer
adjustable 0 to 30 minutes

Applicator (Transducer)
Crystal Material
barium-titanate
Applicator Beam Type
collimating
Frequency 1.0 MHz ± 5%
ERA (Effective Radiating Area) 4 cm² ± 20%
BNR (Beam Nonuniformity Ratio)
5.5:1 maximum
Small Faceplate Size
1.5" diameter
Standard Faceplate Size
2.25" diameter

 

Caution: Federal law (USA) restricts this device to sale by or on the order of a licensed practitioner

Ultrasound Features
  • Lightweight standard transducer
  • Optional QuickConnect™ transducer 
  • Optional small transducer with QuickConnect cable
  • Cable fault alarm system
  • Transducer protection switch
  • Adjustable interrupted output mode
  • 0 to 20 watt output •  30 minute timer
High Volt Stimulator Features
  • Dual channel, 4 pad high volt pulsed dc stimulator
  • Selectable frequencies - pulsation to tetanize
  • Selectable surge and reciprocal rates - ramped
  • Intensity reset circuit •  Combination therapy capability
Low Voltage Galvanic Features
  • Single channel, 2 pad low voltage galvanic (dc)
  • 0 to 10 mA current for iontophoresis treatments
  • Adjustable surge and alternating polarity surge rates
  • Combination: iontophoresis/phonophoresis with FDA approved substances
  • Two Year Warranty - Generator - Parts and Labor
  • One Year Warranty - Transducer - Parts and Labor
  • CSA Approved
Electrical Generator - High Volt
Waveform
dc "needle" pulses with no parasitic spike
Output Voltage
0 to 500 peak V
Output Intensity
20 µC maximum charge
per pulse into 100 Ohm load
Pulse Width
30 µs
Frequency Range
1 to 160 pulses per s
Reciprocal/Surge Duration
2.5, 5 and 10 s
Electrical Generator - Low Voltage Galvanic
Description
variable constant current source dc output
Output Intensity
0 to 10 mA
Surge Duration
variable 3.33 s on/off to 0.50 s on/off
Alternating Polarity Surge
variable 3.33 ± to 0.50 s ±
Instrument U/HVG50
Overall Dimensions
19½" W x 11" D x 7" H
Weight (including transducer)
18 lbs.
Shipping Weight
27 lbs.
Ordering Information U/HVG50
Standard Soundhead
32-U/HVG50
Standard QuickConnect Soundhead
32-U/HVG50-D
Small QuickConnect Soundhead
32-U/HVG50-SM
Standard/Small QuickConnect Soundhead
32-U/HVG50-D2


Previous Page

Return to SynchroSonic® U/HVG50

Federal law (USA) restricts Amrex electrotherapy instruments to sale by
or on the order of a licensed practitioner


\\ Welcome || Dealers || Products || Instructional Videos || Accessories //
\\
ATS || L.A. Door to Door Factory Service || Patient Leads || Trade-In Program //
\\
News || Amrex 1-3.3 MHz Ultrasound Output || Contact Us //
\\
User's Guides || History //


 


a division of Amrex-Zetron, Inc.
641 East Walnut Street, Carson, California 90746
Telephone: (800) 221-9069 or (310) 527-6868
Fax: (310) 366-7343
Web Site: http://www.amrex-zetron.com

 

Copyright © 1998 Amrex-Zetron Corporation. All rights reserved.
Last modified on
January 22, 2007

 

Web Site Creator:
Produced and Maintained by Paul Elliott: Designer/Graphics
E-Mail: pkelliot@gte.net

Comments, suggestions welcome!